[. . . ] 3. 0 Watts maximum SWITCH RATING: (SPST) · 30 Amps Inductive/Resistive 24/120V A. C. , 60 Hz. [. . . ] Press the HOUR and MINUTE buttons separately to program the first ON time desired. Note the ON indicator (OFF in the next step) will only be displayed after the hour has been selected unless an ON time was previously entered. Press HOUR and MINUTE buttons separately to select first OFF time or Event #2. Repeat this procedure for up to 4 ON and 4 OFF times (8 Events) as required. TO OVERRIDE PROGRAM Program can be overridden at any time by selecting the MANUAL position. Program set times will be maintained but will not operate the controlled load(s) automatically. TO CHANGE OR DELETE PROGRAM SET POINTS Place Program Selector switch into PROGRAM mode. Note that the times which have been programmed will be displayed or 0:00 will be displayed if no set point has been entered. [. . . ] after installation of Time Switch). INTERMATIC INCORPORATED SPRING GROVE, ILLINOIS 60081-9698 LR3730 158ET10654 [. . . ]